Digital atc ph mesure pen meter tester monitor water y

1x - Digital PH tester
This is a great tool for when you need to test your pond or aquarium pH. It is a fast and accurate meter. What you save in buying drop type test kits will more than pay for this meter! And those kits are not usally very accurate. You will never have to guess which color the ph Strips are closest to! It is fast and simple to use. Just dip it in the pond, aquarium or swimming pool and read the reading on the digital display in just a few seconds This unit comes in sturdy clear plastic case with calibration screwdriver and users guide!



This PH Meter is ideal for Aquriums, Aquacultures, Bevereges, Fish Hatcheries, Food Processing, Laboratory, Paper Industry, Swimming Pool, School & colleges.
Specifications:
.Measurement: pH 0.0 to 14.0 pH
.ATC Temperature: 0.0 to 50*C ( 32 to 122*F)
.Resolution: pH 0.1
.Accuracy: pH +/- 0.1
.Calibration: Calibrated by factory(manual 1point)
.Instructions include
.New in Box

 OPERATION
    • Remove the protective cap. Do not be alarmed if white crystals
    appear around the cap. This is normal with pH electrodes and
    they dissolve when rinsed with water.
    • Turn the meter on sliding the switch on the top.
    • Immerse into solution up to the max immersion level. • Stir gently and wait until the display stabilizes. Readings are automatically compensated for temperature variations.
    • After use, switch off pH meter, use the water clean the electrode and replace the protective cap.
    DO NOT USE DISTILLED OR DEIONIZED WATER FOR STORAGE PURPOSES.
    • Large fluctuations in readings could be due to lack of calibration, dry electrode or rundown batteries.
   
    CALIBRATION
    • Immerse the tester up to the maximum immersion level in pH 6.86 buffer solution
    • Allow the reading to stabilize and using a small screwdriver adjust the calibration trimmer to read 6.9.
    Calibration is now complete.
    ALWAYS USE FRESH BUFFERS FOR CALIBRATION.
    BATTERY REPLACEMENT
    When the meter cannot be switched on or the display fades, pull out the battery compartment and replace all three 1.5V batteries, while paying attention to their polarity. Batteries should only be replaced in a safe area using the battery type specified in this instruction manual.