108 Blue LED beacon 12v + 220v power supply girophare vdllplb1 light effect

LED beacon. Adapts to different applications. 108 LEDs create a bright effect. The speed of rotation is adjustable.
specifications

9 segments of 12 LEDs
very low power consumption

specifications

color: blue
Power: 12 VAC 500mA (adapter incl.)
LEDs: 108 pcs
dimensions: O 143 x 182 mm
Weight: 0.67 kg

Use this device only indoors. Protect from rain, humidity and splashing water. Never place objects containing liquid on the device.
NEVER disassemble or open the housing. Touching a live wire can cause fatal electric shock.
 
Protect the AC adapter from damage.
Warning ! The AC adapter should be replaced by the manufacturer, a technician, or other person qualified to
avoid any danger.
Always disconnect the device when the device is not in use or before cleaning it. Pull on the plug to disconnect the appliance; not on the cord.
Do not look directly into the light source, in order to avoid the risk
• epileptic seizure in prone people
• temporary blindness (flash blindness)
• permanent (irreversible) damage to the eye.

Familiarize yourself with the operation of the device before using it.
• Any modification is prohibited for safety reasons. The
damage caused by modifications by the customer does not fall
not under warranty.
• Use the device only for its intended function. Improper use cancels
automatically the guarantee.
• The warranty does not apply to damage caused by neglecting
certain instructions in this manual and your dealer will not accept any
responsibility for the resulting problems and faults.
• Do not plug in the device immediately after exposure to
temperature variations. In order to avoid damage, wait
until the device has reached room temperature.
• Keep this manual for future reference.

Installation
security
• Before mounting the device, read and follow the warnings
indicated in the Safety Instructions.
Installation
• The load-bearing construction of the device must be able to withstand
10 times the weight of the device for an hour, without a
deformation of the construction results.
• Avoid positioning yourself below the device to remove it or when
assembly or cleaning. A qualified technician should service
the device before commissioning and then once a year.
• Install the device in a place where there is not much traffic and
inaccessible to unauthorized persons.
• Remove any flammable material within a radius of 0.5 m around the
the device.
7. Employment

Do not use the device if the housing or wiring is damaged. Do not try to repair the device yourself, contact your dealer.
1. Connect the plug of the mains adapter (incl.) To the input
power supply [2] located on the lower part of the device.
The device will turn on automatically.
2. Adjust the speed of rotation with the speed control [3]. Turn the
button to the left to decrease the speed or to the right to
increase the speed.
3. Disconnect the device from the electrical network after use.
8. Cleaning and maintenance
Before any cleaning or maintenance:
1. Disconnect the device from the electrical network.
2. Let the device cool down.
Cleaning
• Clean the device with a soft cloth.
• Allow all parts to dry thoroughly before reconnecting the device.
• The frequency of cleaning depends on the installation environment (p.
ex. smoke, fog residue, dust, condensation).
• Never immerse the device in liquid.

Interview
• Tighten the nuts and screws and check that they do not rust.
• The housing, lenses, mounting brackets and construction
load-bearing structure cannot be deformed, adapted or tinkered with (e.g. do not
do not drill additional holes in a support, do not move the
connections etc.).
• There are no user serviceable parts.
• Order any spare parts from your dealer. .